Accessories

Building slabs and stones In addition to fireplaces, NunnaUuni manufactures building stones and slabs for the covering of walls and floors. Your nearest NunnaUuni distributor can provide you with more information on materials for building and covering. Bottom layers for fireplaces Bottom layers can be installed under NunnaUuni fireplaces. They increase product height by 70 or 35 mm, and they can be purchased as optional equipment. MammuttiStone is also a versatile and durable building material.

Flue lining stones
Pre-formed stones can be used to cover the part of a steel flue between the fireplace and inner ceiling.

The outer dimensions of steel flues vary with the manufacturer. When ordering, remember to check with your NunnaUuni distributor that the outer diameter of the flue matches the inner diameter of the flue lining stones.

Flue connection parts

The flue connection can be made by using a separate flue connection part that is connected at the side or back of the fireplace. This is used when the flue does not reach floor level or where local and national regulations so dictate. The flue connection must be made above the soot hatch located lower in the flue.

The fireplace may be located further from the flue, if necessary. In this case, the flue connection can be made using a Ø180-mm connection pipe that can be placed inside a closed bench.

Sandblast decorating stones

A unique sandblast decorating stone can be delivered by special order.

Ask for the options after consulting your NunnaUuni distributor.